No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Feature Description - User Access 01

This is NE40E-M2 V800R010C10SPC500 Feature Description - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Description for the Attributes of OWN Type

Description for the Attributes of OWN Type

OWN attributes are virtual attributes. They have their own names, encapsulation formats, and supported packets, but lack their own attribute numbers.

OWN attributes are supported only in the device-to-RADIUS direction. They cannot be independently used due to lack of attribute numbers. Before being sent to a RADIUS server, OWN attributes must be converted to other attributes. The numbers of the attributes belong to the original attributes, but the attribute content and formats belong to the OWN attributes. For example, if the radius-attribute translate nas-port hw-own-nas-port-new send command is run, the NAS-Port attribute sent to the RADIUS server uses the HW-Own-NAS-Port-New attribute's content and format.

All the currently defined OWN attributes function similarly to the preceding example. They are implemented by serving as the substitute formats for basic attributes. The following table describes all the available OWN attributes, their supporting status in packets, and their corresponding basic attributes.

OWN Attribute Access-Request Packet Accounting-Request Packet COA & DM ACK Packet Basic Attribute
HW-Own-NAS-Identify-SIM(OWN-1) Supported Supported Supported NAS-Identifier(32)
HW-Own-NAS-Port-New(OWN-2) Supported Supported Not supported NAS-Port(5)
HW-Own-NAS-Port-Identify-Old(OWN-3) Supported Supported Not supported NAS-Port-Id(87)
HW-Own-Calling-Station-Id-Old(OWN-4) Supported Supported Not supported Calling-Station-Id(31)
HW-Own-Nas-Port-Id-Uppercase(OWN-5) Supported Supported Not supported NAS-Port-Id(87)
HW-Own-NAS-Port-CID(OWN-6) Supported Supported Not supported NAS-Port(5)
Connect-Port-New(OWN-7) Supported Not supported Not supported Connect-port(128)
HW-Own-NAS-Port-QinQ(OWN-8) Supported Supported Not supported NAS-Port(5)
Nas-Port-Id-QINQ-Reverse(OWN-9) Supported Supported Not supported NAS-Port-Id(87)
Download
Updated: 2019-01-02

Document ID: EDOC1100058415

Views: 12031

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next