No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Precautions for Using Labels

Precautions for Using Labels

When using labels, note the following:
  • When printing, writing, or attaching labels, keep the labels clean.
  • Since the label paper is made of moistureproof and waterproof materials, do not use ink-jet printers and ink pens to print or write labels.
  • Labels should be attached neatly. New-type labels are strip-shaped. If they are attached at incorrect locations or in the wrong direction, the appearance of the device is affected.
  • Power cable ties should be tied at the same position on each power cable, with identification plates on the same side.
  • The positions of "up", "down", "left" or "right" are all based on the viewpoint of the engineer working on the label.
Download
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 9586

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next