No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Labels for Trunk Cables

Labels for Trunk Cables

This section describes the labels for trunk cables, including the labels for cables between devices and the labels for cables between a device and a DDF.

There are two types of labels for trunk cables:

  • Labels for cables between devices, for example, the label for a cable between a trunk board and a built-in transmission device and the label for a cable between two trunk boards. Attach labels to both ends of a cable to indicate the locations of the cable on both ends.
  • Labels for cables between the device and a DDF. Attach labels to both ends of a cable to indicate the locations of the cable on the device and the DDF.

Trunk cables include 75Ω/120Ω E1 cables, 100Ω T1 cables, 34M, 45M, 140M, and 155M cables, and 120Ω to 75Ω trunk cables.

Download
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 9391

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next