No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

The E1 interface on the NE40E uses 75-ohm or 120-ohm trunk cables. One end of the 16xE1 cable is connected to the E1 electrical interface on the device using the Anea 96 connector; the other end of the 16xE1 cable is connected to the Digital Distribution Frame (DDF) using a connector that needs to be made as required on site.

Download
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 9437

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next