No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Optical Connectors

Optical Connectors

The NE40E uses the LC/UPC optical connector.

The outlines and operations of each connector as well as a brief description of how to install and uninstall them are described in the following sections.

LC/UPC Optical Connector

Figure 3-10 shows the outline of the LC/UPC optical connector.

Figure 3-10 LC/PC optical connector

The plugging/unplugging of an LC/UPC optical interface only needs an axial operation, that is, a push/pull in line with the cable, instead of a rotation.

The operation procedures and precautions are as follows:

  • To insert, carefully align the head of the fiber jumper with the optical interface and push in the fiber using appropriate force.

  • To remove, press the clip and slightly push in the fiber connector, and then pull it out.

Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 9240

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next