No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Following All Safety Precautions

  • To ensure human and device security, comply with all the safety precautions marked on the device and instructed in this document before any operation. The CAUTION, WARNING, and NOTE items in this document do not cover all the safety precautions that must be obeyed. They are supplements to the safety precautions.
  • When operating Huawei products and equipment, comply with safety precautions and special safety instructions relevant to the corresponding equipment provided by Huawei. The safety precautions in this document are only some that Huawei can predict. Huawei is not liable for any consequence that results from violation of universal regulations for safety operations and safety codes on design, production, and equipment use.

Complying with Local Rules and Regulations

When operating a device, comply with local laws and regulations.

Installation Personnel Requirement

Installation and maintenance personnel must be trained to perform operations correctly and safely.

Personnel Safety

  • A high-voltage power supply provides power for device operations. Direct human contact with the high voltage power supply or human contact through damp objects can be fatal.
  • Unspecified or unauthorized high voltage operations could result in fire or electric shock, or both.
  • Ground a device before powering it on; otherwise, the human body and the device are exposed to danger.
  • Before performing operations on the power supply facilities, power off these facilities.
  • Do not look into the optical port without eye protection when handling optical fibers.
  • To protect human respiratory organs and human eyes from dust, take protective measures when drilling holes.
  • When working at heights, prevent objects from falling down.

Device Security

  • Keep an unpacked device upright and handle it with care when carrying it or installing it into a cabinet.
  • Use a ladder to lay out cables. Do not trample on a device.
  • Wear an ESD wrist strap or ESD gloves when handling circuit boards. Otherwise, the static electricity discharged from the human body may damage the electrostatic sensitive components, such as large-scale integrated circuits (LSIs) on the circuit board.
  • Before operating the device, check the electrical connection of the device, and ensure that the device is properly grounded.
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 9452

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next