No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction

Introduction

Table 3-12 lists the types of optical fibers that the NE40E uses.

Table 3-12 Types of optical fibers

No.

Description

Local Connector

Remote Connector

Cable Mode

1

Fiber connecting an interface board to the ODF

LC/UPC

FC/UPC

Single-mode

2

Fiber connecting interface boards

LC/UPC

LC/UPC or SC/UPC

Single-mode /multi-mode

3

Fiber connecting an interface board to another device

LC/UPC

LC/UPC or SC/UPC

Single-mode /multi-mode

The optical transmission module of the multi-transverse mode needs to be connected to the multi-mode fiber. The optical transmitting module in single-longitudinal or multi-longitudinal mode needs to be connected to the single-mode fiber.

Download
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 9541

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next