No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Requirements for ESD Prevention

Requirements for ESD Prevention

The absolute value of electrostatic voltage must be less than 1000 V. To achieve this, take the following measures:
  • Train operators on ESD prevention.
  • Keep proper humidity in the equipment room to reduce the impact of static electricity.
  • Lay out ESD flooring in the equipment room.
  • Put on ESD shoes and clothing before entering the equipment room.
  • Use ESD tools, such as wrist straps, tweezers, and pullers.
  • Ground all conductive materials in the room, including computer terminals. Use ESD worktables.
  • Keep non-antistatic materials (such as common bags, foams, and rubbers) at least 30 cm (0.98 ft) away from boards and ESD-sensitive components.
Download
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 10550

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next