No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-M2 V800R010C10SPC500 Installation Guide

This is NE40E-M2 V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Labels for Fibers Connecting the Device and ODF

Labels for Fibers Connecting the Device and ODF

Information on the Label

Table 6-3 provides information on both sides of a label for a fiber that connects the device and ODF.
Table 6-3 Information on a label for a fiber between the device and ODF

Content

Meaning

Description

MN-B-C-D-R/T

MN: cabinet number

M identifies the row number of a cabinet. Rows are numbered from A to Z from front to back.

N identifies the column number of a cabinet. Columns are numbered from 01 to 99 from left to right.

For example, A01 indicates row A, column 01.

B: chassis number

A two-digit number that indicates the position of a subrack in a cabinet, for example, 01. Subracks are numbered from bottom to top.

C: physical slot number

A two-digit number starting from 1. For example, 01 indicates slot 1. Slots are numbered from top to bottom and from left to right.

D: optical interface number.

A two-digit number starting from 0. For example, 01 indicates the second optical interface. Optical interfaces are numbered from top to bottom and from left to right.

R: receive optical interface

T: transmit optical interface

-

ODF-MN-B-C-R/T

MN: ODF number

M identifies the row number of an ODF. Rows are numbered from A to Z from front to back.

N identifies the column number of an ODF. Columns are numbered from 01 to 99 from left to right.

For example, G01 indicates row G, column 01.

B: row number of a terminal device

A two-digit number ranging from 01 to 99, for example, 01.

C: column number of the terminal device

R: receive optical interface

T: transmit optical interface

-

Example Label

Figure 6-10 shows an example label.

Figure 6-10 Example label for a fiber connecting the device and ODF

The label shown in Figure 6-10 contains the following information:
  • "ODF-G01-01-01-R" indicates that the local end of the optical fiber is connected to receive terminal in row 01, column 01 of the ODF in row G, column 01.
  • "A01-01-05-01-R" indicates that the other end of the optical fiber is connected to receive optical interface 02 on slot 05 in chassis 01 in the cabinet in row A, column 01.
Download
Updated: 2019-01-02

Document ID: EDOC1100058424

Views: 10571

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next