No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Routing 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining OSPFv3

Maintaining OSPFv3

Maintaining OSPFv3 involves resetting OSPFv3 and clearing OSPFv3 statistics.

Clearing OSPFv3

You can reset OSPFv3 counters.

Context

OSPFv3 information cannot be restored after you clear it. Exercise caution when clearing it.

To clear OSPFv3 information, run the following reset commands in the user view.

Procedure

  • Run the reset ospfv3 { process-id | all } counters [ neighbor [ interface-type interface-number ] [ nbrrouter-id ] ] command to reset OSPFv3 counters.
  • Run the reset ospfv3 { process-id | all } counters maxage-lsa command to delete the statistics about router-LSAs that have reached the aging time.
  • Run the reset ospfv3 { process-id | all } frr command to perform OSPFv3 IP FRR calculation again.
  • Run the reset ospfv3 { process-id | all } peer [ interface-type interface-number ] router-id command to restart an OSPFv3 neighbor.

Resetting OSPFv3

Restarting OSPFv3 can reset OSPFv3.

Context

The OSPF neighbor relationships will be torn down if you run the reset ospfv3 command to reset OSPF connections. Exercise caution when running the command.

After modifying the OSPFv3 routing policy or protocol, reset the OSPFv3 connection to validate the modification. To reset OSPFv3 connections, run the reset ospfv3 command in the user view.

Procedure

  • Run the reset ospfv3 { process-id | all } command to restart the OSPFv3 process.
  • Run the reset ospfv3 { process-id | all } peer [ interface-type interface-number ] router-id command to restart an OSPFv3 neighbor.
  • Run the reset ospfv3 { process-id | all } redistribution command to reset OSPFv3 route redistribution.
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058916

Views: 35552

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next