No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Routing 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of RIPng

Overview of RIPng

RIPng protocol can implement the interworking of small and medium-sized networks.

Definition

RIP next generation (RIPng) is an extension to RIP version 2 (RIP-2) on IPv6 networks. Most RIP concepts apply to RIPng.

RIPng is a distance-vector routing protocol, which measures the distance (metric or cost) to the destination host by the hop count. In RIPng, the hop count from a device to its directly connected network is 0, and the hop count from a device to a network that is reachable through another device is 1. When the hop count is equal to or exceeds 16, the destination network or host is defined as unreachable.

To be applied on IPv6 networks, RIPng makes the following changes to RIP:

  • UDP port number: RIPng uses UDP port number 521 to send and receive routing information.

  • Multicast address: RIPng uses FF02::9 as the link-local multicast address of a RIPng device.

  • Prefix length: RIPng uses a 128-bit (the mask length) prefix in the destination address.

  • Next hop address: RIPng uses a 128-bit IPv6 address.

  • Source address: RIPng uses link-local address FE80::/10 as the source address to send RIPng Update packets.

Purpose

RIPng is an extension to RIP for support of IPv6.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058916

Views: 37512

Downloads: 57

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next