No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Routing 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Limitations for OSPFv3-NE05E

Limitations for OSPFv3-NE05E

Restrictions

Guidelines

Impact

If the OSPFv3 dead timer is too short, OSPFv3 neighbor relationships may easily go Down, interrupting services.

Use the default Hello timer and dead timer. AlterNonetively, set a value that is no less than 40s for the dead timer.

If the OSPFv3 dead timer is too short, OSPFv3 neighbor relationships may easily go Down, interrupting services.

OSPFv3 checks whether a neighbor in the full state exists in the backbone area before advertising a default route to the stub area.

Plan configurations properly.

Default routes fail to be delivered.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058916

Views: 35430

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next