No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Routing 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - IP Routing

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Limitations for IS-IS-NE05E

Limitations for IS-IS-NE05E




If an IS-IS Level-1-2 router imports a route with a priority lower than IS-IS and the route is learned by another level of the current router after route leaking, route flapping occurs.

Properly plan the network.

Route flapping occurs.

If multiple primary IP addresses are configured on an IS-IS BFD interface, the smallest IP address that is on the same network segment as the interface IP address of an IS-IS neighbor is used to establish a BFD session with the neighbor.

Properly plan IP addresses and do not delete interface IP addresses.

When the IP address used for establishing a BFD session is deleted, the BFD module reports a BFD Down event to IS-IS and the IS-IS neighbor relationship goes Down.

Updated: 2019-01-14

Document ID: EDOC1100058916

Views: 41874

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next