No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Routing 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of IPv4 Static Routes

Overview of IPv4 Static Routes

Configuring IPv4 static routes can implement the interworking of simple networks.

Definition

Static routes are special routes that are configured by network administrators.

Purpose

On a simple network, only static routes can ensure that the network runs properly. If a router cannot run dynamic routing protocols or cannot generate routes to a destination network, you can configure static routes on the router.

Route selection can be controlled using static routes. Properly configuring and using static routes can improve network performance and guarantee the required bandwidth for important applications. When a network fault occurs or the network topology changes, however, static routes must be changed manually by the administrator.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058916

Views: 37538

Downloads: 57

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next