No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Routing 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - IP Routing

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP Extensions

Configuring BGP Extensions

Configuring BGP extensions enables BGP to provide routing information for multiple routing protocols.

Usage Scenario

The section does not describe the commands that are associated with specific applications and used in the MP-BGP address family view in details.

For the BGP configurations in the IPv6 address family view, see chapter "BGP4+ Configuration."

For the BGP configurations in the BGP-IPv4 address family view and the BGP-VPN instance address family view, see the NE deviceMid-End Router Configuration Guide - VPN.

For the applications of MP-BGP on multicast networks, see chapter "MBGP Configuration" in the NE device Mid-End Router Configuration Guide - IP Multicast.

Pre-configuration Tasks

Before configuring BGP extensions, complete the following task:

Configuration Procedures


Updated: 2019-01-14

Document ID: EDOC1100058916

Views: 41867

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next