No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - System Monitor 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - System Monitor
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NQA

Maintaining NQA

Maintaining NQA involves stopping or restarting NQA test instances, deleting statistics, and deleting test records.

Checking Test Types and Server Types Supported by the NE

The display command can be used to display test types and server types supported by the NE.

Procedure

  • Run the display nqa support-test-type command to check the supported test types.

    <HUAWEI> display nqa support-test-type 
    NQA support test type information:
    ----------------------------------------------------
      Type                Description
      tcp                 TCP type NQA test
      udp                 UDP type NQA test
      jitter              JITTER type NQA test
      icmp                ICMP type NQA test
      snmp                SNMP type NQA test
      trace               TRACE type NQA test
      lspping             LSPPING type NQA test
      lsptrace            LSPTRACE type NQA test
      dns                 DNS type NQA test
      pwe3ping            PWE3PING type NQA test
      pwe3trace           PWE3TRACE type NQA test
      macping             MACPING type NQA test
      lspjitter           LSPJITTER type NQA test
      pathmtu             PATHMTU type NQA test
      icmpjitter          ICMPJITTER type NQA test
      vplsping            VPLSPING type NQA test
      vplspwping          VPLSPWPING type NQA test
      vplspwtrace         VPLSPWTRACE type NQA test
      generalflow         GENERALFLOW type NQA test 
      ethernet-service    ETHERNET-SERVICE type NQA test
    ----------------------------------------------------

  • Run the display nqa support-server-type command to check the supported server types.

    <HUAWEI> display nqa support-server-type
    NQA support server type information:
    ----------------------------------------------------
      Type            Description
      tcp server      NQA TCP server
      udp server      NQA UDP server
      icmp server     NQA ICMP server
    ----------------------------------------------------
    <HUAWEI> display nqa support-server-type
    NQA support server type information:
    ----------------------------------------------------
      Type            Description
      tcp server      NQA TCP server
      udp server      NQA UDP server
      icmp server     NQA ICMP server
    ----------------------------------------------------

Stopping a Test Instance

This section describes how to stop a test instance when its test parameters need to be changed.

Prerequisites

Run the following commands in the NQA view to stop an NQA test instance.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    An NQA test instance is created, and the view of the test instance is displayed.

  3. Run stop

    The NQA test instance is stopped.

  4. Run commit

    The configuration is committed.

Restarting an NQA Test Instance

This section describes how to restart (namely, to stop and then immediately start) an NQA test instance.

Prerequisites

Run the following commands in the NQA view to restart an NQA test instance.

Context

Restarting an NQA test instance terminates the running test instance.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    An NQA test instance is created, and the view of the test instance is displayed.

  3. Run restart

    The NQA test instance is restarted.

  4. Run commit

    The configuration is committed.

Checking 802.1ag Packet Statistics

When the test initiated using the ping mac-8021ag or trace mac-8021ag command fails, run the display cfm statistics lblt command to check statistics about the 802.1ag packets sent, received, forwarded, and replied by the local device. The command output helps determine whether the test failure is caused by a device or link fault.

Procedure

  • Run display cfm statistics lblt

    802.1ag packet statistics are displayed.

Deleting Statistics

This section describes how to delete test statistics before the next test is conducted.

Prerequisites

Run the following commands in the user view to delete NQA statistics.

Context

Statistics cannot be restored after being deleted. Exercise caution when running the reset command.

Procedure

  1. Run reset lspv statistics

    LSPV statistics are deleted.

  2. Run reset cfm statistics lblt

    802.1ag packet statistics are cleared.

Deleting Test Records

This section describes how to delete test records before the next test is conducted.

Prerequisites

Before running the clear-records command, run the stop and commit commands to stop the NQA test instance first.

Context

Test records cannot be restored after being deleted. Exercise caution when running the clear-records command.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    An NQA test instance is created, and the view of the test instance is displayed.

  3. Run clear-records

    Historical records and result records of the NQA test instance are deleted.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058924

Views: 6994

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next