No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - System Monitor 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - System Monitor
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the TWAMP Configuration

Verifying the TWAMP Configuration

After the Two-Way Active Measurement Protocol (TWAMP) is configured, you can verify TWAMP configurations.

Prerequisites

Run the following commands to check the previous configuration.

Procedure

  • Run the display twamp global-info command to check global information about TWAMP.
  • Run the display twamp control-session [ verbose | client-ip client-ip-address client-port client-port-number [ vpn-instance vpn-instance-name ] ] command to check information about control sessions on the server.
  • Run the display twamp test-session [ verbose | reflector-ip reflector-ip-address reflector-port reflector-port-number [ vpn-instance vpn-instance-name ] ] command to check information about test sessions on the session-reflector.

Example

Run the display twamp global-info command to view global information about TWAMP. For example:
<HUAWEI> display twamp global-info
Start Time                       : 2012-08-05 16:47:55
Control Session Numbers          : 10
Control Session Rejected Numbers : 0
Test Session Numbers             : 10
Test Session Completed Numbers   : 10
Test Session Aborted Numbers     : 0
Test Tx Numbers                  : 100
Test Rx Numbers                  : 100
Run the display twamp control-session verbose command to view detailed information about control sessions on the server. For example:
<HUAWEI> display twamp control-session verbose
State                : active
Control Session ID   : 0
Client IP            : 1.1.1.1
Client Port          : 37524
Server IP            : 1.1.1.2
Server Port          : 862 
VPN Instance         : -
Mode                 : unauthenticated
Inactive Time(s)     : -
Test Session Number  : 10 
Created Time         : 2012-08-05 16:47:55
Normal Stop          : 100
Abort Stop           : 10
----------------------------------------------
State                : active
Control Session ID   : 1
Client IP            : 10.1.1.1
Client Port          : 37524
Server IP            : 10.10.10.2
Server Port          : 862 
VPN Instance         : -
Mode                 : unauthenticated
Inactive Time(s)     : -
Test Session Number  : 10 
Created Time         : 2012-08-05 16:47:55
Normal Stop          : 100
Abort Stop           : 10
Run the display twamp test-session verbose command to view detailed information about test sessions on the session-reflector. For example:
<HUAWEI> display twamp test-session verbose
State                : active
Sender IP            : 1.1.1.1
Sender Port          : 65530
Reflector IP         : 1.1.1.2
Reflector Port       : 65530
Session ID           : 1.1.1.1:1039033631:FCF9C6DA
Control Session ID   : 1
Mode                 : unauthenticated
DSCP                 : 03
Padding Length       : 128
VPN Instance         : -
Create Time          : 2012-08-05 16:47:55
Last Start Time      : 2012-08-05 16:47:55
Last Stop Time       : never
Sequence Number      : 2000
Test Tx Numbers      : 100
Test Rx Numbers      : 100
Test Discard Numbers : 0
-----------------------------------------------------
State                : active
Sender IP            : 1.1.1.1
Sender Port          : 65530
Reflector IP         : 1.1.1.2
Reflector Port       : 65530
Session ID           : 1.1.1.1:1039033631:FCF9C6DA
Control Session ID   : 1
Mode                 : unauthenticated
DSCP                 : 03
Padding Length       : 128
VPN Instance         : -
Create Time          : 2012-08-05 16:47:55
Last Start Time      : 2012-08-05 16:47:55
Last Stop Time       : never
Sequence Number      : 2000
Test Tx Numbers      : 100
Test Rx Numbers      : 100
Test Discard Numbers : 0
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058924

Views: 7132

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next