No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - System Monitor 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - System Monitor
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NetStream

Maintaining NetStream

This section describes how to maintain NetStream.

Monitoring the NetStream Operating Status

In routine maintenance, you can run the following command in any view to check the NetStream operating status.


  • Run display ip netstream cache origin slot slot-id

    Information about the NetStream flow buffer is displayed.

  • Run display ip netstream statistics slot slot-id

    Statistics about NetStream flows are displayed.

  • Run display ip netstream statistics interface interface-type interface-number

    Statistics about the sampled packets on an interface are displayed.

  • Run display netstream { all | global | interface interface-type interface-number }

    NetStream configurations in different views are displayed.

  • Run display ip netstream cache { as | as-tos | bgp-nexthop-tos | destination-prefix | destination-prefix-tos | index-tos | mpls-label | prefix | prefix-tos | protocol-port | protocol-port-tos | source-prefix | source-prefix-tos | source-index-tos | vni-sip-dip | vlan-id } slot slot-id

    Information about various aggregated flows in the buffer is displayed.

  • Run display ip netstream export option

    Information about the output option template is displayed.

  • Run display ip netstream sampler-id allocated-info

    Sampling ID allocation information on a specified interface board is displayed.

Deleting NetStream Template Statistics

You can delete existing NetStream template statistics before collecting up-to-date statistics.


  • Run the reset ip netstream statistics command to delete IPv4 NetStream template statistics.
Updated: 2019-01-14

Document ID: EDOC1100058924

Views: 6976

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next