No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - System Monitor 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - System Monitor
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Server

Configuring the Server

This section describes how to configure the TWAMP server, which responds to the control-client's request for establishing, starting, or stopping a TWAMP session.


  1. Run system-view

    The system view is displayed.

  2. Run nqa twamp

    The TWAMP view is displayed.

  3. Run server

    The server function is enabled, and the server view is displayed.

  4. (Optional) Run tcp port port-number [ all | vpn-instance vpn-instance-name ]

    A TCP port is specified.

    By default, TCP port 862 is used on the TWAMP server.

  5. (Optional) Run control-session inactive inactive-interval

    An inactive interval is configured for a control session.

    By default, the inactive interval of a control session is 900s.

  6. (Optional) Run client acl { basic-number | adv-number | acl-name }

    The ACL rule to be referenced is configured.

  7. Run commit

    The configuration is committed.

Updated: 2019-01-14

Document ID: EDOC1100058924

Views: 7073

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next