No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - System Monitor 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - System Monitor
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Limitations for TWAMP Light-NE05E

Limitations for TWAMP Light-NE05E




If the loop breaking function is enabled, the reserved Z field in packets needs to be changed. In case of interconnection with other vendors, check whether the vendors are using or have modified the reserved Z field.


test-session session-id local-ip local-ip-address remote-ip remote-ip-address local-port port remote-port port [ vpn-instance vpn-name ] [ anti-loop-on ]

In case of interconnection with devices from other vendors, use commands to prevent loop breaking.

When the loop breaking function is enabled, the involved device may fail to be interconnected with devices from vendors.

During DSCP configuration, priority mapping can be performed only based on the default traffic classification policy template.


TWAMP does not support traffic entering queues based on the traffic policy configured on the interface.

Updated: 2019-01-14

Document ID: EDOC1100058924

Views: 6983

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next