No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Carrier's Carrier (Solution 1)

Verifying the Configuration of Carrier's Carrier (Solution 1)

After configuring carrier's carrier, you can view information about public network routes on PEs and CEs of carriers with different levels, and VPN routes on the PEs.

Context

The Carrier's Carrier function has been configured.

Procedure

  • Run the display ip routing-table command to check the public routing tables on the CEs and PEs of the Level 1 carrier and the Level 2 carrier.
  • Run the display ip routing-table vpn-instance vpn-instance-name command to check the private routing tables on the PEs of the Level 1 carrier and the Level 2 carrier.

Example

Run the display ip routing-table command on the PEs and CEs of the Level 1 carrier and the Level 2 carrier. You can view the following:

  • The public routing table of the Level 1 carrier PE contains only the routes of the Level 1 carrier network.

  • The public routing table of the Level 1 carrier CE contains the internal routes instead of the external routes of the Level 2 carrier network. The public routing table of the Level 2 carrier PE contains the internal routes of the Level 2 carrier network.

  • There are routes to the related remote CEs between the Level 2 carrier CEs.

Run the display ip routing-table vpn-instance command on the PEs of the Level 1 carrier and the Level 2 carrier. You can view the following in the private routing table:

  • The VPN routing table of the Level 1 carrier PE contains the internal routes instead of the external routes of the Level 2 carrier network.

  • The VPN routing table of the Level 2 carrier PE contains the external routes of the Level 2 carrier.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 29994

Downloads: 54

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next