No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Binding a VSI to the L2VE Interface

Binding a VSI to the L2VE Interface

Take the L2VE interface as Attachment Circuit (AC) interface when binding a VSI to the L2VE interface.

Context

Do as follows on NPEs.

Procedure

  1. Configure a single VLAN for an L2VE sub-interface and bind the L2VE sub-interface to a VSI.
    1. Run system-view

      The system view is displayed.

    1. Run interface virtual-ethernet interface-number.subinterface-number

      The L2VE sub-interface view is displayed.

    1. Run vlan-type dot1q vlan-id

      The VLAN ID of the L2VE sub-interface is configured.

    1. Run l2 binding vsi vsi-name

      The L2VE interface is bound to a VSI.

    1. Run commit

      The configuration is committed.

  2. Configure a VLAN range for an L2VE sub-interface and bind the L2VE sub-interface to a VSI.
    1. Run system-view

      The system view is displayed.

    1. Run interface virtual-ethernet interface-number.subinterface-number

      The L2VE sub-interface view is displayed.

    1. Run encapsulation dot1q-termination [ rt-protocol ]

      A termination encapsulation type is configured for the L2VE sub-interface.

    1. Run vlan-group group-id

      A user VLAN group is configured.

    1. Run commit

      The configuration is committed.

    1. Run quit

      Exit the VLAN group view.

    2. Run dot1q termination vid low-pe-vid [ to high-pe-vid ] [ vlan-group group-id ]

      A VLAN range is configured for the L2VE sub-interface.

    3. Run l2 binding vsi vsi-name

      The L2VE interface is bound to a VSI.

    4. (Optional) Run dot1q termination client-mode single

      The dot1q VLAN tag termination sub-interface is enabled to deliver only one leaf for replication of one copy of broadcast traffic when the sub-interface provides access for qualify-mode VPLS services.

      NOTE:
      Before running the dot1q termination client-mode single command:
      • A dot1q VLAN tag termination sub-interface has been configured.
      • The dot1q VLAN tag termination sub-interface has been bound to a qualify-mode VSI (namely, the mac-learn-style qualify command has been run for the VSI).

    5. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 30077

Downloads: 54

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next