No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling L2VPN Loop Detection in Loose Mode

(Optional) Enabling L2VPN Loop Detection in Loose Mode

L2VPN loop detection in loose mode detects whether a loop exists between the AC interfaces of two PEs on a VPLS or VLL network to which a user network is dual homed.

Context

Perform the following steps on each PE.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run loop-detection loose enable

    L2VPN loop detection is enabled in loose mode.

  3. (Optional) Run loop-detection identifier

    Device identifier is configured for L2VPN loop detection in loose mode.

  4. Run commit

    The configuration is committed.

  5. (Optional) Run interface { ethernet | gigabitethernet | eth-trunk } interface-number.subinterface-number

    The Ethernet interface view is displayed.

    NOTE:

    This interface must be an AC interface bound to a specified VSI.

  6. (Optional) Run loop-detect priority priority

    An interface blocking priority is configured for L2VPN loop detection in loose mode.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 30175

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next