No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting VPWS PWs

Resetting VPWS PWs


The following reset commands reset VPWS configurations. Exercise caution when using the commands.


  • Run the reset pw [ peer-address peer-address ] pw-id vc-type command to reset a specified PW or all PWs referencing the PW template.
  • Run the reset local-ce mac [ interface-type interface-number ] command to clear information about the MAC address and VLAN ID of a local CE dynamically learned by the Ethernet interface of a PE, so that the PE can re-learn this information.
  • Run the reset traffic-statistics l2vpn pw { all | interface interface-type interface-number [ secondary | bypass ] } command to clear traffic statistics about a VPWS PW.
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 32491

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next