No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Hub and Spoke Configuration

Verifying the Hub and Spoke Configuration

After configuring hub & spoke, check VPN routing information on the PE or CE.

Prerequisites

Hub & spoke has been configured.

Procedure

  • Run the display ip routing-table vpn-instance vpn-instance-name command to check routing information about VPN-in and VPN-out on the Hub-PE.
  • Run the display ip routing-table command on the Hub-CE and all the Spoke-CEs to check routing information.

Example

Run the display ip routing-table vpn-instance vpn-instance-name command. The command output shows that the routing table of VPN-in has routes to all the spoke sites and the routing table of VPN-out has routes to the hub site and all the spoke sites.

Additionally, the Hub-CE and all the Spoke-CEs have routes to the hub site and all the spoke sites.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 33780

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next