No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting BGP Connections

Resetting BGP Connections

After modifying BGP configurations, you can reset or softly reset the BGP connections for new configurations to take effect.

Context

Resetting BGP connections interrupts VPN services. Exercise caution when running this command.

After modifying BGP configurations, you can reset or softly reset the BGP connections for new configurations to take effect. Soft reset requires BGP peers to have the route refresh capability. That means BGP peers must support Route-Refresh messages.

Procedure

  • Run the refresh bgp vpn-instance vpn-instance-name ipv4-family { all | peer-address | group group-name | internal | external } { import | export }command in the user view to trigger the soft reset of the VPN instance IPv4 address family's BGP connections in the inbound or outbound direction, so that the new configurations can take effect.
  • Run the refresh bgp vpnv4 { all | peer-address | group group-name | internal | external } { import | export } command in the user view to trigger the soft reset of the BGP VPNv4 connections in the inbound or outbound direction, so that the new configurations can take effect.
  • Run the reset bgp vpn-instance vpn-instance-name ipv4-family { as-number | peer-address | group group-name | all | internal | external } command in the user view to reset the BGP connections of the VPN instance IPv4 address family, so that the new configurations can take effect.
  • Run the reset bgp vpnv4 { as-number | peer-address | group group-name | all | internal | external } command in the user view to reset the BGP VPNv4 connections, so that the new configurations can take effect.
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 37222

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next