No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Operating Status of a VPWS PW

Monitoring the Operating Status of a VPWS PW

Context

In routine maintenance, you can run the following commands in any view to check the operating status of a VPWS PW as needed.

Procedure

  • Run the display vll ccc [ ccc-name | type local ] command to check CCC information.
  • Run the display l2vpn ccc-interface vc-type { all | vc-type } [ down | up ] command to check information about interfaces used by L2VPN connections.
  • Run the display mpls l2vc [ vc-id | interface interface-type interface-number ] command to check local VPWS PW information.
  • Run the display mpls l2vc remote-info [ vc-id | unmatch | verbose ] command to check remote VPWS PW information.
  • Run the display mpls static-l2vc [ vc-id | interface interface-type interface-number | state { down | up } | brief ] command to check SVC VPWS PW information.
  • Run the display mpls switch-l2vc [ ip-address vc-id encapsulation encapsulation-type | state { down | up } | brief ] command to check VPWS PW switching information.
  • Run the display pw-template [ pw-template-name ] command to check PW template information.
  • Run the display local-ce mac [ interface-type interface-number ] command to check information about the MAC address and VLAN ID of a local CE.
  • Run the display l2vpn error discard command to check information about messages discarded by the L2VPN component.
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 36073

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next