No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing an EBGP Peer Relationship Between ASBRs

Establishing an EBGP Peer Relationship Between ASBRs

An EBGP peer relationship is established between ASBRs to advertise routes destined for the loopback interfaces on PEs.


  • Perform the following steps on each ASBR:
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run ip address ip-address { mask | mask-length }

      The IP address is configured.

    4. Run quit

      Return to the system view.

    5. Run bgp as-number

      The BGP view is displayed.

    6. Run peer ipv4-address as-number as-number

      The remote ASBR is configured as the EBGP peer.

    7. Run commit

      The configuration is committed.

Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 36700

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next