No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying a Tunnel Policy to a VPN

Applying a Tunnel Policy to a VPN

This section describes how to apply a tunnel policy to a VPN to change the tunnel used to carry VPN services or the sequence in which tunnels are selected for VPN services.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip vpn-instance vpn-instance-name

    The VPN instance view is displayed.

  3. Run ipv4-family

    The VPN instance IPv4 address family view is displayed.

  4. Run tnl-policy policy-name

    A tunnel policy is applied to the VPN instance IPv4 address family.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27501

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next