No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP EVPN Soft Reset

Configuring BGP EVPN Soft Reset

BGP EVPN soft reset allows a device to receive EVPN routes from BGP EVPN peers again.

Usage Scenario

BGP EVPN soft reset performs a soft reset on BGP EVPN connections, which triggers BGP EVPN peers to send EVPN routes to a local device without tearing down the BGP EVPN connections and allows the local device to apply a new filtering policy and refresh the BGP EVPN routing table.

Pre-configuration Tasks

Before configuring BGP EVPN soft reset, configure EVPN functions.

Procedure

  • In the user view, run:

    refresh bgp evpn { all | peer-address | group group-name } { export | import }

    BGP EVPN soft reset is configured.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 32481

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next