No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the CCC VPWS Configuration

Verifying the CCC VPWS Configuration

After configuring CCC VPWS, check the configurations.

Prerequisites

CCC VPWS has been configured.

Procedure

  • Run the display vll ccc [ ccc-name | type { local | remote } ] command to check CCC connection information.
  • Run the display l2vpn ccc-interface vc-type ccc [ down | up ] command to check information about interfaces used by L2VPN CCC connections.
  • Run the display mpls l2vpn vpws [ interface interface-type interface-number [ verbose ] ] command to check VPWS information.

Example

Run the display vll ccc command. The command output shows that the CCC VC status is Up.

<HUAWEI> display vll ccc ce1-ce2
name: ce1-ce2, type: local, state: up

intf1: GigabitEthernet0/3/0 (up ethernet),access-port: false

intf2: GigabitEthernet0/3/2 (up ethernet),access-port: false
no control word
VC last up time : 2012/03/08 05:13:10
VC total up time:  4 days, 4 hours, 58 minutes, 1 seconds

Run the display l2vpn ccc-interface vc-type command. The command output shows that the VC type is CCC and the VC status is Up.

<HUAWEI> display l2vpn ccc-interface vc-type all
Total ccc-interface of CCC: 2
up (2), down (0)
Interface                            Encap Type               State     VC Type
GigabitEthernet0/3/0                 ethernet                 up        ccc
GigabitEthernet0/3/2                 ethernet                 up        ccc

Run the display mpls l2vpn vpws command. The command output shows VPWS information.

[HUAWEI] display mpls l2vpn vpws
Pri : Primary            Sec : Secondary            Byp : Bypass
PWb : PW-bypass          Acb : AC-bypass
Access Circuit                Virtual Circuit               States Active   Role
GE0/1/0                       GE0/1/1                       Down   Inactive Pri
GE0/1/5                       2.2.2.2:1                     Down   Active   Pri
                              GE0/1/3                       Down   Inactive Sec
GE0/1/1                       GE0/1/2                      Down   Inactive Pri
                              2.2.2.2:0                     Down   Inactive Sec
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 33264

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next