No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Dynamic BFD for SVC PW

Configuring Dynamic BFD for SVC PW

Dynamic BFD for SVC PW accelerates PW fault detection, facilitating fast switching of SVC PWs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd

    BFD is enabled globally, and the BFD global view is displayed.

  3. Run quit

    Return to the system view.

  4. Run interface interface-type interface-number [ .subinterface-number ]

    The AC interface view is displayed.

  5. Run mpls l2vpn pw bfd [ detect-multiplier multiplier | min-rx-interval rx-interval | min-tx-interval tx-interval ] * [ remote-vcid vc-id ] [ secondary ]

    Dynamic BFD for SVC PW is configured.

    NOTE:

    If the PW to be monitored is a secondary PW, be sure to specify secondary.

  6. Run quit

    Return to the system view.

  7. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 33663

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next