No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Inter-AS BGP VPLS Option A

Configuring Inter-AS BGP VPLS Option A

In inter-AS BGP VPLS Option A, an ASBR must reserve an interface as an AC interface for each inter-AS PW. Inter-AS BGP VPLS Option A applies to scenarios where few inter-AS PWs are required. Compared with L3VPN, inter-AS BGP VPLS Option A consumes more resources and requires more configuration workload.

Procedure

  1. Configure BGP VPLS on the PEs and ASBRs in each AS. For configuration details, see Configuring BGP VPLS.
  2. Configure an AC link between ASBRs in different ASs.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run l2 binding vsi vsi-name

      The interface is bound to a VSI.

    4. Run quit

      Return to the system view.

    5. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 36833

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next