No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating VE Interfaces

Creating VE Interfaces

This part describes how to configure an L2VE interface that terminates the L2VPN and configure an L3VE interface that access L3VPN, and how to bind the VE interfaces to the relevant VE-Group.


Do as follows on NPEs.


  1. Run system-view

    The system view is displayed.

  2. Run interface virtual-ethernet interface-number

    The VE interface view is displayed.

  3. According to the function of interface, run:

    • If the interface is L2VE:

      ve-group ve-group-id l2-terminate

      The VE interface is set to an L2VE interface that terminates L2VPN, and the interface is bound to a VE-Group.

    • If the interface is L3VE:

      ve-group ve-group-id l3-access

      The VE interface is set to an L3VE interface that accesses the MPLS L3VPN, and it is bound to a VE-Group.

    The L2VE interface and L3VE interface in the same VE-Group must be on the same board.

  4. (Optional) Run l3ve track pw-state

    Associates the L3VE interface state with the PW state.

  5. Run commit

    The configuration is committed.

Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 36612

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next