No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the SVC VPWS Configuration

Verifying the SVC VPWS Configuration

After configuring a static PW, check information about the static PW.

Prerequisites

A static PW has been configured.

Procedure

  • Run the display mpls static-l2vc [ vc-id | interface interface-type interface-number | state { down | up } | brief ] command to check information about a specified static PW on a PE.

Example

Run the display mpls static-l2vc [ vc-id | interface interface-type interface-number | state { down | up } ] command. The command output shows that VC State of the PW is up.

<HUAWEI> display mpls static-l2vc
 Total svc connections:  1,  1 up,  0 down

 *Client Interface     : GigabitEthernet0/1/2 is up
  AC Status            : up
  Integrative AC status: up                                                     
  VC State           : up
  VC ID                : 0
  VC Type              : Ethernet
  Destination          : 3.3.3.9
  Transmit VC Label    : 100
  Receive VC Label     : 200
  Label Status         : 0
  Token Status         : 0
  Control Word         : Disable
  VCCV Capability      : alert ttl lsp-ping bfd
  active state         : active
  OAM Protocol         : --
  OAM Status           : --
  OAM Fault Type       : --
  PW APS ID            : --
  PW APS Status        : --
  TTL Value            : 1
  Link State           : up
  Tunnel Policy Name   : --
  PW Template Name     : --
  Main or Secondary    : Main
  load balance type    : flow
  Access-port          : false
    VC tunnel/token info : 1 tunnels/tokens                                     
  NO.0  TNL type       : lsp   , TNL ID : 0x800802                            
  Backup TNL type      : lsp   , TNL ID : 0x0                                 
  Create time          : 0 days, 2 hours, 40 minutes, 31 seconds
  UP time              : 0 days, 2 hours, 40 minutes, 31 seconds
  Last change time     : 0 days, 2 hours, 40 minutes, 31 seconds
  VC last up time      : 2013/01/07 11:46:05
  VC total up time     : 0 days, 2 hours, 40 minutes, 31 seconds
  CKey                 : 4
  NKey                 : 3
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27699

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next