No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Multicast VPLS Configuration

Verifying the Multicast VPLS Configuration

After configuring multicast VPLS, check P2MP tunnel information.

Prerequisites

VSI-based MAC address management has been configured.

Procedure

  • Run the display vsi name name inclusive-provider-tunnel command to check P2MP tunnel information.

Example

# Run the display vsi name name inclusive-provider-tunnel command on the root node. The command output shows mLDP P2MP tunnel information.

<HUAWEI> display vsi name vsi1 inclusive-provider-tunnel
VSI name: vsi1
  Ingress provider tunnel
    PMSI type      : P2MP mLDP
    Root ip        : 4.4.4.4
    Opaque value   : 01000400002001
    State          : up
    Leaf list count: 6
    Leaf list      : 1.1.1.1
                     3.3.3.3
                     5.5.5.5
                     6.6.6.6
                     7.7.7.7
                     8.8.8.8
  Egress provider tunnel
  Egress PMSI count: 0

# Run the display vsi name name inclusive-provider-tunnel command on the root node. The command output shows P2MP TE tunnel information.

<HUAWEI> display vsi name vsi2 inclusive-provider-tunnel
VSI name: vsi2
  Ingress provider tunnel
  Egress provider tunnel
  Egress PMSI count: 2
   *PMSI type      : P2MP TE
    Ingress LSR ID : 2.2.2.2
    Session ID     : 32801
    P2MP ID        : 0x2020202
    State          : up
   *PMSI type      : P2MP TE
    Ingress LSR ID : 3.3.3.3
    Session ID     : 32769
    P2MP ID        : 0x3030303
    State          : up
  Protect Information:
    Group:
      Ingress LSR ID    : 2.2.2.2
      Role              : primary
      Valid             : true
      Active State      : active
      OAM Protocol      : --
      OAM State         : --

      Ingress LSR ID    : 3.3.3.3
      Role              : backup
      Valid             : true
      Active State      : inactive
      OAM Protocol      : --
      OAM State         : --

      Wtr Interval(s)   : 300
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27414

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next