No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PEs to Exchange VPLS Information as BGP Peers

Configuring PEs to Exchange VPLS Information as BGP Peers

BGP VPLS inherits BGP configurations in a large part and shares TCP connections with BGP. A major difference between BGP and BGP VPLS is that BGP VPLS requires PEs to exchange VPLS information as BGP peers in the L2VPN-AD address family view.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run peer ip-address as-number as-number

    A BGP peer and its AS number are specified.

    By default, no BGP peer is configured, and no AS number is specified for a peer.

  4. Run l2vpn-ad-family

    The L2VPN-AD address family view is displayed.

  5. (Optional) Run vpn-orf enable

    The ORF is enabled.

  6. Run peer ipv4-address enable

    The route exchange capability is enabled.

    By default, only the peer in the BGP IPv4 unicast address family view is automatically enabled.

  7. Run signaling vpls or peer ip-address signaling vpls

    BGP VPLS is enabled.

    By default, the VPLS signaling mode is not enabled.

  8. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 32453

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next