No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Inter-AS LDP VPLS Option A

Configuring Inter-AS LDP VPLS Option A

Inter-AS LDP VPLS Option A is recommended for scenarios where few inter-AS PWs are required. In inter-AS LDP VPLS Option A, an ASBR must reserve an interface as an AC interface for each inter-AS PW. Compared with L3VPN, inter-AS LDP VPLS Option A consumes more resources and requires more configuration workload.


  1. Configure LDP VPLS on the PE and ASBR in each AS. For configuration details, see Configuring LDP VPLS.
  2. Configure an AC link between ASBRs in different ASs.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The view of the interface that connects to the peer ASBR is displayed.

    3. Run l2 binding vsi vsi-name

      The interface is bound to a VSI.

    4. Run quit

      Return to the system view.

    5. Run commit

      The configuration is committed.

Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 33127

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next