No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BGP AD VPLS Configuration

Verifying the BGP AD VPLS Configuration

After completing BGP AD VPLS configurations, run the following commands to view information about the local and remote VSIs and VPLS connections.

Prerequisites

The BGP AD VPLS has been configured.

Procedure

  • Run the display vsi [ name vsi-name ] [ verbose ] command to check VSI information.
  • Run the display vsi bgp-ad { import-vt | export-vt | remote-export-vt } command to check the VPN targets on a PE and its remote BGP peers.
  • Run the display vsi bgp-ad remote vpls-id vpls-id command to check information about a specified remote PE.
  • Run the display vpls connection [ bgp-ad | vsi vsi-name ] [ down | up ] [ verbose ] command to check information about BGP AD VPLS connections.

Example

Run the display vsi [ name vsi-name ] [ verbose ] command. The command output shows the VSI status, PW signaling, and member discovery style. The VSI State field displays up; the PW Signaling field displays ad; the Member Discovery Style field displays --.

<HUAWEI> display vsi verbose
 ***VSI Name               : vplsad1
    Administrator VSI      : no
    Isolate Spoken         : disable
    VSI Index              : 0
    PW Signaling           : bgpad
    Member Discovery Style : --
    Bridge-domain Mode     : disable
    PW MAC Learn Style     : unqualify
    PW MAC Learning Style  : unqualify
    Encapsulation Type     : vlan
    MTU                    : 1500
    Diffserv Mode          : uniform
    Service Class          : --
    Color                  : --
    DomainId               : 255
    Domain Name            :
    Ignore AcState         : disable
    P2P VSI                : disable
 Multicast Fast Swicth  : disable 
    Create Time            : 0 days, 9 hours, 24 minutes, 45 seconds
    VSI State              : up
    Resource Status        : --
    VPLS ID                : 192.168.1.1:1
    RD                     : 192.168.1.1:1
    Import vpn target      : 100:1
    Export vpn target      : 100:1
    VSI ID                 : 1.1.1.9

   *Peer Router ID         : 2.2.2.9
    VPLS ID                : 192.168.1.1:1
    SAII                   : 1.1.1.9
    TAII                   : 2.2.2.9
    VC Label               : 1024
    Peer Type              : dynamic
    Session                : up
    Tunnel ID              : 0x800003
    Broadcast Tunnel ID    : 0x800003
    CKey                   : 2
    NKey                   : 1

   *Peer Router ID         : 3.3.3.9
    VPLS ID                : 192.168.1.1:1
    SAII                   : 1.1.1.9
    TAII                   : 3.3.3.9
    VC Label               : 1025
    Peer Type              : dynamic
    Session                : up
    Tunnel ID              : 0x800006
    Broadcast Tunnel ID    : 0x800006
    CKey                   : 4
    NKey                   : 3

    Interface Name         : GigabitEthernet0/1/0.1
    State                  : up
    Access Port            : false
    Last Up Time           : 2011/04/02 09:11:26
    Total Up Time          : 0 days, 9 hours, 24 minutes, 31 seconds

   **PW Information:

   *Peer Ip Address        : 2.2.2.9
    PW State               : up
    Local VC Label         : 1024
    Remote VC Label        : 1024
    PW Type                : label
    Tunnel ID              : 0x800003
    Broadcast Tunnel ID    : 0x800003
    Broad BackupTunnel ID  : 0x0
    Ckey                   : 0x2
    Nkey                   : 0x1
    Main PW Token          : 0x800003
    Slave PW Token         : 0x0
    Tnl Type               : LSP
    OutInterface           : GigabitEthernet0/1/1
    Backup OutInterface    :
    Stp Enable             : 0
    PW Last Up Time        : 2011/04/02 09:11:56
    PW Total Up Time       : 0 days, 9 hours, 24 minutes, 1 seconds
   *Peer Ip Address        : 3.3.3.9
    PW State               : up
    Local VC Label         : 1025
    Remote VC Label        : 1025
    PW Type                : label
    Tunnel ID              : 0x800006
    Broadcast Tunnel ID    : 0x800006
    Broad BackupTunnel ID  : 0x0
    Ckey                   : 0x4
    Nkey                   : 0x3
    Main PW Token          : 0x800006
    Slave PW Token         : 0x0
    Tnl Type               : LSP
    OutInterface           : GigabitEthernet0/1/2
    Backup OutInterface    :
    Stp Enable             : 0
    PW Last Up Time        : 2011/04/02 09:11:58
    PW Total Up Time       : 0 days, 9 hours, 23 minutes, 59 seconds 

Run the display vsi bgp-ad import-vt command. The command output shows the import VPN target on a BGP AD VPLS-enabled PE.

<HUAWEI> display vsi bgp-ad import-vt
import vpn target list:
  100:1                  192.168.12.4:100       312:250
  192.168.120.220:53364  100:100                5.5.5.5:13
  312:250

Run the display vsi bgp-ad remote vpls-id command. The command output shows information about a remote PE with the RD of 1:1.

<HUAWEI> display vsi bgp-ad remote vpls-id 1:1
BGP AD Network Layer Reachability Information:
-------------------------------------------
 *Peer             : 1.1.1.1
  VPLS ID          : 1:1
  VSI ID           : 1.1.1.1
  VSI index        : 0	
  Export vpn target: 1:1	
-------------------------------------------

Run the display vpls connection bgp-ad up verbose command. The command output shows detailed information about the connections of BGP AD VSIs that are in the Up state.

<HUAWEI> display vpls connection bgp-ad up verbose
VSI Name: bgpad1                           Signaling: bgpad
  **VPLS-ID         : 100:1
    VC State        : up
    Encapsulation   : vlan
    Group ID        : 0
    MTU             : 1500
    Peer Ip Address : 3.3.3.3
    PW Type         : label
    Local VC Label  : 1025
    Remote VC Label : 1025
    Tunnel Policy   : --
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 31855

Downloads: 57

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next