No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing BGP Routes to IGP

Importing BGP Routes to IGP

To enable LDP to allocate labels for BGP, you need first import BGP routes to the relevant IGP protocol.


IS-IS is used in the following procedure. To import BGP routes to IS-IS, perform the following steps on a Level 1 carrier CE.


  1. Run system-view

    The system view is displayed.

  2. Run bgp as-number

    The BGP view is displayed.

  3. Run import-rib public labeled-unicast

    The device is enabled to import labeled routes to the routing table of the public unicast address family.

  4. Run quit

    Return to the previous view.

  5. Run isis [ process-id ] [ vpn-instance vpn-instance-name ]

    The IS-IS view is displayed.

  6. Run import-route bgp [ cost cost ] [ route-policy route-policy-name ]

    The device is enabled to import BGP routes to IS-IS.

  7. Run commit

    The configuration is committed.

Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 32985

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next