No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the PW APS Configuration

Verifying the PW APS Configuration

After you complete the configurations, check information about the PW APS instance and its associated PW protection groups.

Procedure

  • Run the display mpls l2vpn pw-aps aps-id [ verbose ] command to check information about a PW APS instance and its associated PW protection groups.

Example

Run the display mpls l2vpn pw-aps command. The command output shows a summary of all PW APS instances and their associated PW protection groups.

<HUAWEI> display mpls l2vpn pw-aps
Total APS Number: 2                                                            
 Local Id    Remote Id    Status    Request Result    Role    Total VPN Number  
 ----------------------------------------------------------------------------------------------------------
 1           --           SF_P      Work              --      2       
 2           --           SF_P      Work              --      2 

Run the display mpls l2vpn pw-aps aps-id command. The command output shows a summary of the specified PW APS instance and its associated PW protection groups.

<HUAWEI> display mpls l2vpn pw-aps 1
 Local Id    Remote Id    Status    Request Result    Role    Total VPN Number  
 ------------------------------------------------------------------------------ 
 1           --           SF_P      Work              --      2                 

Run the display mpls l2vpn pw-aps aps-id verbose command. The command output shows detailed information about the specified PW APS instance and its associated PW protection groups.

<HUAWEI> display mpls l2vpn pw-aps 1 verbose
 APS Information:
   Description            :--
   Local Id               : 1
   Status                 : NR
   Work Path Status       : NoDefect
   Protect Path Status    : NoDefect
   Far End Status         : NR
   Request Result         : Work
   Wtr Interval(s)        : 300
   HoldOff Interval(ms)   : 0
   Operation Type         : Revertive
   Role                   : master
   Remote Id              : 1
   Alarm Info             : None
   Hardware resource      : Normal
   Total VPN Number       : 1
 ----------------------------------------
 PW Information:
   Number                 : 1
   Client Interface       : GigabitEthernet0/1/0.1
   Bind Type              : admin
  Primary PW:
    VC ID                 : 1
    VC Type               : VLAN
    Destination           : 2.2.2.2
    VC State              : down
  Secondary PW:
    VC ID                 : 2
    VC Type               : VLAN
    Destination           : 3.3.3.3
    VC State              : up     
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27698

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next