No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of a BGP/MPLS IP VPN

Monitoring the Running Status of a BGP/MPLS IP VPN

Monitoring the running status of a BGP/MPLS IP VPN involves checking VPN instance information, VPNv4 peer information, and BGP peer log information.

Context

In routine maintenance, you can run any of the following commands in all views to check the running status of BGP/MPLS IP VPN.

Procedure

  • Run the display ip routing-table vpn-instance vpn-instance-name [ [ filter-option ] [ verbose ] | statistics ] command to check information about the IP routing table of a VPN instance.
  • Run the display ip vpn-instance [ verbose ] [ vpn-instance-name ] command to check information about a VPN instance.
  • Run the display mpls lsp command to check information about LSPs.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table destination-address [ mask | mask-length ] command to check information about a specific BGP VPNv4 routing entry.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table statistics [ match-options ] command to check information about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table [ match-options ] command to check information about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } group [ group-name ] command to check information about the BGP VPNv4 peer groups.
  • Run the display bgp { all | vpn-instance vpn-instance-name } peer [ [ peer-address ] verbose ] command to check information about the BGP VPNv4 peer.
  • Run the display bgp { all | vpn-instance vpn-instance-name } network command to check information about the VPNv4 routes imported into the BGP routing table using the network command.
  • Run the display bgp vpn-instance vpn-instance-name peer { group-name | peer-address } log-info command to check the logs about the BGP peers of the VPN instance IPv4 address family.
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 28035

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next