No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Local CCC Connection

Creating a Local CCC Connection

Creating a local CCC connection enables two CEs that connect to the same PE to communicate.

Context

When configured with a local CCC connection, the PE functions similar to a Layer 2 switch to directly transmit the CEs' packets without using LSPs.

Perform the following steps on a PE connecting two CEs:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls l2vpn

    MPLS L2VPN is enabled.

  3. Run quit

    Return to the system view.

  4. Run ccc [ ip-interworking ] ccc-connection-name interface interface-type1 interface-number1 [ access-port ] [ raw | tagged ] out-interface interface-type2 interface-number2 [ access-port ] [ raw | tagged ]

    A local CCC connection is created.

    • Because the local CCC connection is bidirectional, only one connection is required, and only the inbound and outbound interfaces of the connection need to be configured on the PE.
    • If the link encapsulation types on the two CEs are inconsistent, configure ip-interworking in this command to enable heterogeneous IP interworking for the local CCC connection.
    • The raw, tagged, and access-port parameters can be configured in this command only when this command is applied to Ethernet links. The access-port parameter applies only to Ethernet main interfaces.

  5. (Optional) Run ccc ccc-name description description-text

    A description is configured for the local CCC connection.

  6. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27865

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next