No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Collecting the Traffic Statistics of a VPLS PW

Collecting the Traffic Statistics of a VPLS PW

After configuring the function to collect VPLS traffic statistics, check information about the traffic on VPLS PWs.

Context

NOTE:
If a carrier needs to create a model of traffic between IP MANs and between MPLS core MANs for the reference of DiffServ TE deployment and maintenance, or the carrier needs to charge the non-monthly rental subscribers based on traffic, the carrier can collect the traffic statistics of a specified PW.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the vsi vsi-name [ static ] command to enter the VSI view.
  3. Run the vsi vsi-name [ static | auto ] command to enter the VSI view.
  4. Run the following commands as needed:

    • LDP VPLS
      1. Run the pwsignal ldp command to enter the VSI-LDP view.
      2. Run the traffic-statistics peer peer-ip-address [ negotiation-vc-id vc-id ] enable or traffic-statistics enable command to enable the traffic statistics collection function for an LDP VPLS PW.
    • BGP VPLS
      1. Run the pwsignal bgp command to enter the VSI-BGP view.
      2. Run the traffic-statistics peer peer-address remote-site site-id enable command to enable the traffic statistics collection function for a BGP VPLS PW.
    • BGP AD VPLS
      1. Run the bgp-ad command to enter the VSI-BGP AD view.
      2. Run the traffic-statistics enable or traffic-statistics peer peer-address enable command to enable traffic statistics collection for BGP AD VPLS PWs.

  5. Run the quit command to return to the VSI view.
  6. Run the traffic-statistics packet-type enable command to enable packet-type-based traffic statistics collection for VPLS PWs.

    Traffic statistics collection has been enabled for VPLS PWs using the traffic-statistics enable command.

  7. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27612

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next