No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Inter-AS VPWS Configuration

Verifying the Inter-AS VPWS Configuration

After configuring inter-AS VPWS, check local and remote PW information.

Prerequisites

Inter-AS VPWS has been configured.

Procedure

  • Run the display mpls l2vc [ vc-id | brief | interface interface-type interface-number ] command to check local PW information.
  • Run the display mpls l2vc remote-info [ vc-id | unmatch | verbose ] command to check remote PW information.
  • Run the display mpls l2vpn connection l2vpn-name [ remote-ce remote-ce-id | down | up | verbose ] command to check BGP VPWS connection information.

Example

Run the display mpls l2vc [ vc-id | brief | interface interface-type interface-number ] command on a PE. The command output shows that a PW has been established and VC state is up.

<HUAWEI> display mpls l2vc interface gigabitethernet 0/1/0
*client interface       : GigabitEthernet0/1/0 is up
 Administrator PW             : no
 session state                : up
 AC status                    : up
 VC state                     : up
 Label state                  : 0
 Token state                  : 0
 VC ID                        : 100
 VC type                      : VLAN
 destination                  : 2.2.2.2
 local group ID               : 0         remote group ID      : 0
 local VC label               : 18        remote VC label      : 18
 local AC OAM State           : up
 local PSN OAM State          : up
 local forwarding state       : forwarding
 local status code            : 0x0 (forwarding)
 remote AC OAM State          : up
 remote PSN OAM state         : up
 remote forwarding state      : forwarding
 remote status code           : 0x0 (forwarding)
 ignore standby state         : no
 Dynamic BFD for PW           : enable
 Detect Multipier             : 3
 Min Transit Interval         : 1000
 Min Receive Interval         : 1000
 Dynamic BFD Session          : built
 BFD for PW                   : available
   BFD sessionIndex           : --  BFD state : up
 VCCV State                   : --
 manual fault                 : not set
 active state                 : active
 forwarding entry             : exist
 OAM Protocol                 : --
 OAM Status                   : --
 OAM Fault Type               : --
 PW APS ID                    : --
 PW APS Status                : --
 TTL Value                    : 1
 link state                   : up
 local VC MTU                 : 1500      remote VC MTU        : 1500
 local VCCV                   : alert ttl lsp-ping bfd
 remote VCCV                  : alert ttl lsp-ping bfd
 local control word           : disable   remote control word  : disable
 tunnel policy name           : --
 PW template name             : --
 primary or secondary         : primary
 load balance type            : flow
 Access-port                  : false
 Switchover Flag              : false
 VC tunnel info               : 1 tunnels
    NO.0 TNL type             : ldp, TNL ID : 0x0000000001004c4b43
 create time                  : 0 days, 1 hours, 2 minutes, 56 seconds
 up time                      : 0 days, 1 hours, 1 minutes, 48 seconds
 last change time             : 0 days, 1 hours, 1 minutes, 48 seconds
 VC last up time              : 2012/12/05 02:50:41
 VC total up time             : 0 days, 1 hours, 1 minutes, 48 seconds
 CKey                         : 1
 NKey                         : 1493172332
 L2VPN QoS CIR value          : 3888
 L2VPN QoS PIR value          : 3888
 L2VPN QoS qos-profile name   : --
 PW redundancy mode           : frr
 AdminPw interface            : --
 AdminPw link state           : --
 Forward state                : send inactive, receive inactive 
 Diffserv Mode                : uniform
 Service Class                : --
 Color                        : --
 DomainId                     : --
 Domain Name                  : --

Run the display mpls l2vc remote-info vc-id command on a PE. In the command output, the Peer Addr field displays the peer address of the specified PW.

<HUAWEI> display mpls l2vc remote-info 100
Total remote ldp vc : 1
Transport  Group Peer            Remote       Remote     C   MTU/  N   S
VC ID      ID    Addr            Encap        VC Label   Bit CELLS Bit Bit
100        0     2.2.2..2         vlan               0   1500  1   0

Run the display mpls l2vpn connection command on a PE. The command output shows the VC status.

conn-type: remote
     local vc state:             up
     remote vc state:            up
     local ce-id:                1
     local ce name:              ce1
     remote ce-id:               2
     intf(state,encap):          GigabitEthernet0/1/0(up,ethernet)
     peer id:                    4.4.4.9
     route-distinguisher:        100:1
     local vc label:             294930
     remote vc label:            294929
     tunnel policy:              default 
     CKey:                       129
     NKey:                       3841982621
     primary or secondary:       primary
     forward entry exist or not: true
     forward entry active or not:true
     manual fault set or not:    not set 
     AC OAM state:               up 
     BFD for PW session index:   -- 
     BFD for PW state:           invalid 
     BFD for LSP state:          true
     Local C bit is not set       
     Remote C bit is not set             
     tunnel type:                bgp
     tunnel id:                  0x00000000020104000
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 33580

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next