No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining VPN Tunnel Management

Maintaining VPN Tunnel Management

Maintaining VPN tunnel management involves monitoring the running status of tunnels and commissioning tunnel management.

Monitoring the Running Status of a Tunnel

To determine whether a VPN tunnel has been established and the configurations of an established tunnel, monitor the running status of the VPN tunnel.

Context

In routine maintenance, run the following commands in any view to learn tunnel running information.

Procedure

  • Run the display interface tunnel interface-number command to check information about a tunnel interface.
  • Run the display tunnel-info all command to check tunnel information.
  • Run the display tunnel-info tunnel-id command to check details about a tunnel.
  • Run the display tunnel-policy policy-name command to check the configurations of a specified tunnel policy.
  • Run the display ip vpn-instance verbose [ vpn-instance-name ] command to check the tunnel policy applied to the specified VPN instance.
  • Run the display ip routing-table vpn-instance [ ip-address ] verbose command or the display ipv6 routing-table vpn-instance vpn-instance-name [ ipv6-address ] verbose command to check the tunnel used by VPN routing.
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 33441

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next