No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Static VPLS Configuration

Verifying the Static VPLS Configuration

After configuring Static VPLS, check VSI, AC interface, and label stack information.

Prerequisites

Static VPLS has been configured.

Procedure

  • Run the display vsi [ name vsi-name ] [ verbose ] command to check VSI information.
  • Run the display vsi services { vsi-name | all | interface interface-type interface-number | vlan vlan-id } command to check AC interface information.
  • Run the display mpls label-stack vpls vsi vsi-name peer peer-id vc-id vc-id command to check label stack information.

Example

Run the display vsi [ name vsi-name ] [ verbose ] command. The command output shows that VSI State is displayed as up. If verbose is specified, PW Signaling is displayed as ldp and VSI State is displayed as up.

<HUAWEI> display vsi name a2 verbose
 ***VSI Name               : a2
    Administrator VSI      : no
    Isolate Spoken         : disable
    VSI Index              : 1
    PW Signaling           : ldp
    Member Discovery Style : --
    Bridge-domain Mode     : disable
    PW MAC Learning Style  : unqualify
    Encapsulation Type     : vlan
    MTU                    : 1500
    Diffserv Mode          : uniform
    Service Class          : --
    Color                  : --
    DomainId               : 255
    Domain Name            :
    Ignore AcState         : disable
    P2P VSI                : disable
    Create Time            : 0 days, 23 hours, 28 minutes, 1 seconds
    VSI State              : up

    VSI ID                 : 2
   *Peer Router ID         : 3.3.3.9
    primary or secondary   : primary
    ignore-standby-state   : no
    VC Label               : 18
    Peer Type              : dynamic
    Session                : up
    Tunnel ID              : 0x0000000001004c4b82
    Broadcast Tunnel ID    : --
    Broad BackupTunnel ID  : --
    CKey                   : 1
    NKey                   : 1610612838
    Stp Enable             : 0
    PwIndex                : 0

    Interface Name         : GigabitEthernet0/3/1.1
    State                  : up
    Access Port            : false
    Last Up Time           : 2012/09/10 10:14:46
    Total Up Time          : 0 days, 23 hours, 23 minutes, 5 seconds

  **PW Information:

   *Peer Ip Address        : 3.3.3.9
    PW State               : up
    Local VC Label         : 18
    Remote VC Label        : 18
    PW Type                : label
    Tunnel ID              : 0x0000000001004c4b82
    Broadcast Tunnel ID    : --
    Broad BackupTunnel ID  : --
    Ckey                   : 1
    Nkey                   : 1610612838
    Main PW Token          : 0x0
    Slave PW Token         : 0x0
    Tnl Type               : ldp
    OutInterface           : LDP LSP
    Backup OutInterface    : --
    Stp Enable             : 0
    PW Last Up Time        : 2012/09/11 02:39:41
    PW Total Up Time       : 0 days, 23 hours, 15 minutes, 58 seconds 

Run the display mpls label-stack vpls vsi vsi-name peer peer-id vc-id vc-id command. The command output shows label stack information.

<HUAWEI> display mpls label-stack vpls vsi a2 peer 3.3.3.9 vc-id 18
Label-stack  : 1
Level        : 1
Type         : VPLS
Label        : 1024
Level        : 2
Type         : LDP
Label        : 1025
OutInterface : GigabitEthernet0/1/0
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27832

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next