No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring LDP to Distribute Labels for BGP-Labeled Routes of the Public Network

Configuring LDP to Distribute Labels for BGP-Labeled Routes of the Public Network

By allocating labels for labeled BGP routes, you can establish LDP LSPs for labeled BGP routes in the Level 2 carrier's network.

Context

To configure LDP to distribute labels for the BGP-labeled routes of the public network, perform the following steps on a Level 1 carrier CE.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run lsp-trigger bgp-label-route [ ip-prefix ip-prefix-name ]

    LDP is configured to distribute labels for the labeled BGP routes of the public network.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27857

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next