No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Route Reflection for BGP VPNv4 Routes

Configuring Route Reflection for BGP VPNv4 Routes

The prerequisite for enabling BGP VPNv4 route reflection is that the RR has established MP-IBGP peer relationships with all client PEs.


For detailed configurations about an RR, see "BGP Configuration" in the NE deviceMid-End RouterConfiguration Guide - IP Routing.


  1. Run system-view

    The system view is displayed.

  2. Run bgp as-number

    The BGP view is displayed.

  3. Run ipv4-family vpnv4

    The BGP-VPNv4 address family view is displayed.

  4. Run peer { peer-ipv4-address | group-name } reflect-client

    The local device is configured as an RR, and its peer is considered as an RR client.

  5. (Optional) Run undo reflect between-clients

    Route reflection between clients through the RR is disabled if the clients are fully connected.

  6. Run undo policy vpn-target

    The function to filter VPNv4 routes based on VPN targets is disabled.

  7. (Optional) Run rr-filter extcomm—filter-number

    A reflection policy is configured for the RR. Only IBGP routes whose VPN targets meet the matching rules can be reflected. This allows load balancing among RRs.

  8. Run commit

    The configuration is committed.

Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 36903

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next