No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BGP VPWS Configuration

Verifying the BGP VPWS Configuration

Prerequisites

BGP VPWS has been configured.

Procedure

  • Run the display mpls l2vpn [ l2vpn-name [ local-ce | remote-ce ] ] command to check BGP VPWS information.
  • Run the display mpls l2vpn connection l2vpn-name [ remote-ce remote-ce-id | down | up | verbose ] command to check BGP VPWS connection information.
  • Run the display mpls l2vpn { export-route-target-list | import-route-target-list } command to check the VPN target list of BGP VPWS.

Example

Run the display mpls l2vpn command. The command output shows BGP VPWS information.

<HUAWEI> display mpls l2vpn
VPN number:1
vpn-name             encap-type    route-distinguisher     mtu   ce(L)  ce(R)
vpn1                 ethernet      100:1                   1500  1      1  

Run the display mpls l2vpn connection command. The command output shows BGP VPWS connection information.

<HUAWEI> display mpls l2vpn connection
1 total connections, 
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown

VPN name: vpn1,
1 total connections, 
connections: 1 up, 0 down , 0 local, 1 remote, 0 unknown

  CE name: ce1, id: 1,
  Rid type status peer-id         route-distinguisher interface    
  primary or not
----------------------------------------------------------------------------
  2   rmt  up     3.3.3.9         100:1               GigabitEthernet0/1/0
  primary   

Run the display mpls l2vpn import-route-target-list command. The command output shows the import VPN target list of BGP VPWS.

<HUAWEI> display mpls l2vpn import-route-target-list
import vpn target list:  
  200:1   
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27596

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next